Analyzing the Data¶

Setting Up Detector Channels¶

After importing the data, the User will likely want to store detector channel values for the Experimental Run. This avoids having to remember them every time the User would like to go back and analyze a specific dataset. To begin, run the following

from sxdm import *

file='/path/to/file.h5'

# Display a preset detector channel input that the User can copy
disp_det_chan(file)


# Example Output

detector_scan = {
    'Main_Scan': 2,
    }

filenumber = 2

fluor = {
    'Cu': 2,
    'Fe': 2,
    'Zn': 2,
    'O': 2,
    }

hybrid_x = 2

hybrid_y = 2

mis = {
    '2Theta': 2,
    'Relative_r_To_Detector': 2,
    'Storage_Ring_Current': 2,
    }

roi = {
    'ROI_1': 2,
    'ROI_2': 2,
    'ROI_3': 2,
    }

sample_theta = 2

If detector channels have not been previously set default values will present themselves. Change all values according to your experimental setup.

fluor (dic) The User can place as many Fluorescence dictionary entries as they would like. Except there must be at least 1. Entries can be named however the User would like.

roi (dic) The User can place as many Region of Interest dictionary entries as they would like. Except there must be at least 1. Entries can be named however the User would like.

detector_scan (dic) Main_Scan must be the first and only dictionary entry. This corresponds to the scan where the User rocked the detector. This will be used to determine the x and y angle values.

filenumber (int) This must be a single integer value corresponding to the detector channel associated with the filenumbers of the images.

sample_theta (int) This must be a single integer value corresponding to the detector channel associated with the sample theta angle.

hybrid_x (int) This must be a single integer value corresponding to the detector channel associated with the hybrid_x location/motor position. this should correspond to the detector number of the motor you are scanning in the x direction

hybrid_y (int) This must be a single integer value corresponding to the detector channel associated with the hybrid_y location/motor position. this should correspond to the detector number of the motor you are scanning in the y direction

mis (dic) The User can place as many miscellaneous (mis) dictionary entries as they would like. Except there must be at least 1. Entries can be named however the User would like. None of these are in use in SXDM-1.0. They are there for User additions.

Once these values are set the User can run

# Change Values From Default Output, Run Cell, And Input Values Into Function Below
setup_det_chan(file, fluor, roi, detector_scan, filenumber, sample_theta, hybrid_x, hybrid_y, mis)

Setting Up Frameset¶

After importing the data, and setting the detector channels you will likely need to process and analyze the frame set. This is done through the sxdm.SXDMFrameset class. Most processing and analysis steps are provided as methods on this class, so the first step is to create a frameset object.

from sxdm import *

# Use the same HDF file and group name as when importing
test_fs = SXDMFrameset(file'/path/to/file.h5',
            dataset_name='user_dataset_name',
            scan_numbers=[1, 2, 3, 4, ...],
            fill_num=4,
            restart_zoneplate=False,
            median_blur_algorithm='scipy',
            )

file (str) the path to the hdf5 file you would like to import data from

dataset_name (str) the group name of the scans you are importing

scan_numbers (nd.array or False) an array of ints of the scan numbers you would like to group together. If False - this will import the stored/previously completed scan numbers data

fill_num (int) the amount of digits in the image file number

restart_zoneplate (bool) if you would like to restart the zoneplate data set this to True

median_blur_algorithm (str) this initializes which type of median blur will be performed on the datasets during analysis. acceptable values consist of ‘scipy’ and ‘selective’. ‘’numpy performs a median blur on the entire dataset while ‘selective’ only applies a median blur if the binned 1D data is within a certain User threshold.

Median Blur Type Selection¶

In the creation of the SXDMFrameset there is an option to set a median_blur_algorithm. There are two option in the current version of SXDM. scipy and selective.

mis.median_blur_scipy()

This median blur algorithm calls the scipy.signal.me_blur. This will apply a median blur to the entire 1 dimensional datasets produced by the 2 dimensional images.

mis.median_blur_selective()

This median blur alogrithm bins off line scan data, determines the mean, if there is a value above a User value + mean it will be replaced with the mean value for the chunk. This preserves most of the raw intensity data at the cost of speed.

Zone Plate Values¶

The program will ask for the following values upon the first run:

Diameter Of The Zone Plate Is _____ microns Outermost Zone Plate d Spacing Is _____ nanometers The Size Of Your Detector Pixels Is _____ microns The Detector Theta Value Is _____ Degrees and the Kev is _____ Kev

These values will be stored into the file as attributes for the dataset_name.

Scan Dimensions Check¶

Starting the SXDMFrameset will automatically determine the pixel X resolution for all the imported scans as well as all the Y resolutions for all the scans and checks to make sure every scan has identical X resolutions and every scan has identical Y resolutions. Then it checks to see if the median(x) and median(y) resoltuions are equivalent.

If the program throws an error during the resolution check walk through the following:

Make sure you have set the hybrid_x and hybrid_y values correctly in the setup_det_chan() function.
Pull up all the scan resolutions with test_fs.all_res_x, and test_fs.all_res_y. These will be in the same order as test_fs.scan_numbers. Remove the scan that is throwing the error when setting up test_fs = SXDMFrameset(). Future versions will resample the scans to create identical resolutions in all X, all Y, and in X v. Y.
If there is still an error the scan dimensions are not the same across all scans. Run show_hybrid_dimensions(test_fs) to see all the scan dimensions

Alignment¶

In order to acquire reliable spectra, it is important that the frames be aligned properly. Thermal expansion, motor slop, sample damage and imperfect microscope alignment can all cause frames to be misaligned. It is almost always necessary to align the frames before performing any of the subsequent steps.

Aligning the scan can be carried out through the following code and following the GUI. Alignment can only be done of the Fluorescence images or the Region of Interest images set in the setup_det_chan() function. User will define which one to use in the GUI. Once all alignment centers have been set, it is ok to just quit out of the windows.

from sxdm import *
# Select an imported hdf file to use
test_fs = SXDMFrameset(file="...")

# Run through five passes of the default phase correlation
test_fs.alignment(reset=False)

reset (bool) - if you would like to completely reset the alignment make this equal True

Note

if you import new scan numbers you must make sure reset=True for the first alignment

Diffraction Axis Values¶

To determine the chi bounds (angle bounds) for the detector diffraction images as well as determining the numerical aperture, focal length, and instrumental broadening in pixels.

test_fs.chi_determination()

angle difference (in degrees) from the left/bottom hand side of the detector to the right/top test_fs.chi focal length in millimeters can be called with test_fs.focal_length_mm numberical aperature in millirads can be called with test_fs.NA_mrads instrumental broadening radius in pixels of the diffraction image can be called with test_fs.broadening_in_pix

Region Of Interest Analysis¶

Description¶

This allows the User to section off multiple areas of the diffraction pattern and create heat maps showing which areas of the Field of View light up these diffraction bounding boxes.

Segmentation¶

In order for the program to determine a region of interest the User must define areas of interest. This GUI allows the User to define as many Region Of Interests as they please in the diffraction image. Then upon running the Analysis portion, the program will determine the summed value of these regions, plot them, as well as normalize.

Through a GUI the User can select multiple region of interests from the summed diffraction pattern. Set the diff_segmentation=True in the test_fs.region_of_interest() function to True for this analysis to be carried out.

# Click and drag on the GUI interface to make roi bounding boxes
test_fs.roi_segmentation(bkg_multiplier=1, restart=False)

bkg_multiplier (int) - an integer value applied to the backgound scans

restart (bool) - if set to True this will reset all the segmentation data

Note

If the program throws image_array doesnt exist run create_imagearray(test_fs)

If the program throws scan_background doesnt exist run scan_background(test_fs)

Analysis¶

Allows the User to create new ROI maps for all the imported scans in the frameset. This will handle hot and dead pixels as well as show the user the true gaussian distribution of the fields of view.

test_fs.region_of_interest(rows, columns,
                            med_blur_distance=9,
                            med_blur_height=100,
                            bkg_multiplier=1,
                            diff_segmentation=True,
                            slow=False)

rows (int or tuple) - the total amount of rows the User would like to analyze 25 or (10,17)

columns (int or tuple) - the total amount of columns the User would like to analyze 25 or (10,17)

med_blur_distance (odd int) - the chunksize for the median_blur() function

med_blur_height (int) - the amount above the mean to carry out a median blur - selective median_blur option only

bkg_multiplier (int) - the multipler given to the backgound scans

diff_segmentation (bool) - if False the program will skip the segmentation analysis

slow (bool) - defaults to multiprocess data. If the program uses too much RAM the User can set this value to True to slow down the analysis and save on RAM

To obtain the results from the ROI Analysis use the create_roi() function.

output = create_rois(test_fs.roi_results)

Note

Extremely Large Values??

If the np.nansum(output, axis=(0,1)) values are too high (1e+285) this is due to poor hot pixel removal. Make sure you are using the selective median blur algorithm and lower your median_blur_height value. Also, please see the Viewer section for more details.

Centroid Analysis¶

Description¶

This allows the User to determine the diffraction centroid for each pixle in a particular Field of View

Analysis¶

The centroid analysis function can be called through

test_fs.centroid_analysis(rows,
                            columns,
                            med_blur_distance=9,
                            med_blur_height=10,
                            stdev_min=25,
                            bkg_multiplier=9)

rows - total amount of rows in the scans - can also be a tuple of ints

columns - total amount of columns in the scans - can also be a tuple of ints

med_blur_distance (odd int) - the chunksize for the median_blur() function

med_blur_height (int) - the amount above the mean to carry out a median blur - selective median_blur option only

bkg_multiplier (int) - the multipler given to the backgound scans

stdev_min (int) - the minimum standard deviation of a spectrum which is used to crop signals for centroid determination

slow (bool) - defaults to multiprocess data. If the program uses too much RAM the User can set this value to True to slow down the analysis and save on RAM

Note

Unsure About Dimension Size

If you are unsure of the dimension sizes call self.frame_shape(). The first number is the number of scans, the second number is the about of rows + 1, and the third number is the number of columns + 1

Note

Difference Between slow=False and slow=True

The above function calls one of two functions. Either the centroid_pixel_analysis() function and vectorizes it for moderate run times with excellent RAM management (1-2GB). Or this will call the centroid_pixel_analysis_multi() function which will multiprocess the dataset, but uses considerably more RAM (6-8GB). Analysis route determine by slow bool value.

Note

What Is The test_fs.results Variable

Sets the test_fs.results value where the user can return the results of their analysis. Outputs - [pixel position, spot diffraction pattern, median blurred x axis, median blurred y axis, truncated x axis for centroid finding, x axis centroid value, truncated y axis for centroid finding, y axis centroid value, summed diffraction intensity]

General User Analysis¶

Sometime the built in functions do not align with what Users of the module would like to do. For this there is a general multiprocessing tool for pixel by pixel diffraction pattern analysis.

Standard Set Up¶

from sxdm import *

test_fs = SXDMFrameset(file'/path/to/file.h5',
            dataset_name='user_dataset_name',
            scan_numbers=[1, 2, 3, 4, ...],
            fill_num=4,
            restart_zoneplate=False,
            median_blur_algorithm='scipy',
            )

Defining a Function¶

def do_something(summed_dif, inputs):
    """
    summed_diff - This is an automatic input that has to come first. We are passing in the corrected summed
    diffraction pattern

    inputs - the user defined inputs used to split up into function definitions - must be static values

    """

    adding, subtracting, dividing, multiplying = inputs

    first = np.add(summed_diff, adding)
    second = np.subtract(first, subtracting)
    third = np.divide(second, dividing)
    fourth = np.multiply(third, multiplying)

    return [fourth, third, second, first]

Creating A .tif Image Array¶

create_imagearray(test_fs)

Implementing General Multiprocessing¶

rows = 10       # or (0, 5)
columns = 10    # or (5, 10)

inputs = [1, 3, 5, 7]

output = general_analysis_multi(test_fs, rows, columns, do_something, inputs)

# The output has a general formula [(row, column), analysis_output]

Retrieving Imported Data¶

Return Detector Data¶

return_det(file, scan_numbers, group='fluor', default=False)

Returns all information for a given detector channel for the array of scan numbers.

file - test_fs.file

scan_numbers - test_fs.scan_numbers

group - Examples: filenumber, sample_theta, hybrid_x, hybrid_y, fluor, roi, mis

default - if True this will default to the first fluorescence image

Centering Detector Data¶

centering_det(self, group='fluor', center_around=False, summed=False, default=False)

This returns the User defined detector for all scans set in the self.scan_numbers and centers them around a User defined centering scan index

self - the SXDMFrameset

group - a string defining the group value to be returned filenumber, sample_theta, hybrid_x, hybrid_y, fluor, roi

center_around - if this is set to -1, arrays will not be shifted

summed - if True this will return the summed returned detector value (summed accross all scans)

default - if True this will choose the first fluor or first ROI

Note

The centered file numbers are usually stored as test_fs.im_array

Show HDF5 File Groups¶

h5group_list(file, group_name='base')

This allows the User to view the group names inside the hdf5 file. ‘base’ shows the topmost group. If it errors this means you have hit a dataset and need to call the h5grab_data() function.

file - test_fs.file

group_name - /path/to/group/

Return HDF5 File Data¶

h5grab_data(file, data_loc)

This will grab the data stored in a group. If it errors this means you are not in a dataset directory inside the hdf5 file.

file - test_fs.file

data_loc - /path/to/data

Show Alignment Data¶

grab_dxdy(self)

This returns the dx and dy centering values that are stored from the alignment function

self - the SXDMFrameset

Read HDF5 Group Attributes¶

h5read_attr(file, loc, attribute_name)

This returns the attribute value stored

file - test_fs.file

loc - ‘/path/to/group/with/attribute’

attribute_name - ‘the_attribute_name’

Find Frameset Dimensions¶

SXDMFrameset_object.frame_shape()

This returns the image dimensions for the SXDMFrameset class object

Calculate Background and FileNumber Locations¶

SXDMFrameset_object.ims_array()

This will auto load/calculate the background images and the image location array

Show Raw .tif Image Dimensions¶

SXDMFrameset_object.image_data_dimensions()

This will return the diffraction image dimensions

Pixel Analysis¶

If the user would like to return a certain pixel analysis value they can use the pixel_analysis_return() function to achieve this. Returns a dictionary of entries

#'row_column',
#'summed_dif', - auto set to 0 for saving RAM usage
#'ttheta',
#'chi',
#'ttheta_corr',
#'chi_corr',
#'ttheta_cent',
#'chi_cent',
#'roi'

Saving and Reloading Data¶

Saves self.results to the test_fs.saved_file - this value/file is automatically created in the initial SXDMFrameset setup

test_fs.save()

To reload saved data in the test_fs.saved_file run

test_fs.reload_save()

This will load the results to test_fs.results